Product Descriptio
| Pos. | Part No | Qty | Parts name | Comments |
| | 723-48-26501 | [1] | Valve Assembly, Control Komatsu | 257 kg. |
| | | | ["SN: 61510-UP"] analogs:["7234826500"] |$0. | |
| | 723-48-26500 | [1] | Valve Assembly, Control Komatsu | 257 kg. |
| | | | ["SN: 60001-61509", "SCC: A2"] analogs:["7234826501"] |$1. | |
| 1 | 07000-12012 | [19] | O-ring Komatsu China | 0.001 kg. |
| | | | ["SN: 60001-UP"] analogs:["0700002012", "7082E11790"] | |
| 2 | 723-11-19130 | [4] | O-ring Komatsu | 0.001 kg. |
| | | | ["SN: 60001-UP"] | |
| 3 | 723-46-17520 | [4] | Ring, Back-up Komatsu | 0.001 kg. |
| | | | ["SN: 60001-UP"] | |
| 4 | 07000-12021 | [4] | O-ring Komatsu China | 0.01 kg. |
| | | | ["SN: 60001-UP"] analogs:["0700002021"] | |
| 5 | 07000-13028 | [5] | O-ring Komatsu China | 0.001 kg. |
| | | | ["SN: 60001-UP"] analogs:["0700003028"] | |
| 6 | 07000-13032 | [8] | O-ring Komatsu China | 0.002 kg. |
| | | | ["SN: 60001-UP"] analogs:["YM24321000350", "YM24311000320", "0700003032"] | |
| 7 | 723-46-17510 | [4] | O-ring Komatsu | 0.001 kg. |
| | | | ["SN: 60001-UP"] | |
| 8 | 07000-13036 | [1] | O-ring Komatsu | 0.002 kg. |
| | | | ["SN: 60001-UP"] | |
| 9 | 723-46-17530 | [11] | O-ring Komatsu | 0.001 kg. |
| | | | ["SN: 60001-UP"] | |
| 10 | 723-11-18150 | [2] | O-ring Komatsu | 0.001 kg. |
| | | | ["SN: 60001-UP"] | |
| 11 | 702-16-53920 | [4] | O-ring Komatsu | 0.001 kg. |
| | | | ["SN: 60001-UP"] | |
| 12 | 723-46-18710 | [1] | O-ring Komatsu | 0.001 kg. |
| | | | ["SN: 60001-UP"] | |
| 13 | 722-12-19070 | [2] | O-ring Komatsu | 0.001 kg. |
| | | | ["SN: 60001-UP"] | |
| 14 | 723-46-18720 | [1] | O-ring Komatsu | 0.001 kg. |
| | | | ["SN: 60001-UP"] | |
| 16 | 723-46-17650 | [2] | Valve Komatsu | 0.2 kg. |
| | | | ["SN: 60001-UP"] | |
| 17 | 723-46-14150 | [2] | Spring Komatsu | 0.005 kg. |
| | | | ["SN: 60001-UP"] | |
Maintenance
Here are some suggestions for the maintenance of the distribution valve of the Komatsu 350-8 excavator:
Regular inspection: Regularly check the appearance and working condition of the distribution valve. Make sure there is no obvious damage, leakage or looseness.
Clean the valve body: Regularly clean the outer surface of the distribution valve to remove dust and dirt. Use a detergent and a soft brush for cleaning, but avoid using corrosive or solvent-based cleaners.
Check the connection: Check whether the connection between the distribution valve and the hydraulic line is tight. Make sure there is no looseness or leakage at the connection.
Lubriion: Lubrie the distribution valve regularly according to the manufacturer's recommendations. Use appropriate lubricants and lubrie according to the manufacturer's regulations.
Check the seals: Regularly check the seals of the distribution valve, including O-rings, gaskets, etc. If the seals are found to be worn, aged or leaking, replace them in time.
Regular maintenance: Perform regular maintenance according to the maintenance plan provided by the manufacturer. This may include cleaning and calibrating the distribution valve, replacing seals, checking the internal parts of the valve, etc.
Please note that the above suggestions are for reference only. It is best to refer to the Komatsu 350-8 excavator owner's manual or contact Komatsu or its authorized service center for more detailed and specific maintenance instructions. Improper maintenance may cause equipment damage or failure, so it is recommended to follow the manufacturer's instructions and recommendations when performing maintenance.
About Xinfeng Machinery (XF) parts:
Excavator Spare Parts
| Swing Motor | Travel Motor | Fan Motor |
| Swing Gearbox | Travel Gearbox | Relief Valve |
| Gear Pump | Electrical Parts | Distribution Valve |
| Engine Assembly | Final Drive Assy | Hydraulic Pump |
Advantages
Warehouse Display
Packaging and Delivery
FAQ
1.How to quickly and accurately buy products what lneeded?
A:Provide the original parts number to us to check.
2.How long have you been in the excavator
A:We are engaged in excavator parts since 1998
3.lfI don't know the part number,what shouldI do?
A:Please send us size and pictures of old products.
4.What is the warranty of the products?
A:The warranty is 6/12 Months based on the specific product.
5.How long is your delivery time?
A:The normal delivery time is 3-5 days for stock sproductsafter getting payment. lf not in stock, we will inform you thetime requlred.
6.Which shipping term you can supply?
A:By sea,air or by express ( DHL,Fedex,TNT,UPSEMS)
7.What is your MOQ?
A:Small order and sample order are acceptable
8.Do you have any After-Sales service?
A:Yes!Our
Product Tags:
|
|
Control Valve PC300-8M0 PC350-8M0 Excavator Control Valve 723-47-25601 For KOMATSU Images
|
